1. Index
  2. Literature
  3. Tech Support Humour
  4. Disk Drives

Midimusic.org.uk Computer Humour, Hardware

2.6 Disk Drives

Like many other computer components, disk drives also undergo a wide variety of abuse due to ignorance of their function.

A woman in a non-computer-related company attempted to install a large software package, requiring multiple 5 1/2" disks to install from. She placed disk 1 in drive A:, as instructed. Slightly bewildered when the computer prompted her for disk 2, she nevertheless obliged. But when it asked her to insert disk 3, she went to an office-mate and insisted that another disk would not fit in the drive.

A friend of mine was providing UNIX support for a Large Company (which shall remain nameless). One of his users called up one day to report a problem on a DOS machine. Apparently, her floppy drive was giving general failure error messages when writing new files.

My friend dutifully trotted down there to look at the problem. He foolishly neglected to bring a replacement for the drive. When he arrived, he found that this woman had put a floppy in with the little plastic disk sleeve still in it. The head was trashed and the drive had to be replaced.

About three months later, this same woman calls back with the same problem. This time my friend, now savvy to the wiles of this particular user, grabbed a replacement drive, then trotted on down to visit. When he got there, he found the drive with two 3.5" floppies shoved into it all the way. When he asked why (big mistake), she replied, "I was out of high density disks, so I figured I could just use two low density ones instead."

I once received a call from a customer who was determined he had a failing hard drive. The problem was that his computer wouldn't boot to Windows unless it tried three or four times in succession. His explanation was that this was because the hard drive wasn't "spinning far enough" to find the file it needed to boot. After each attempt, though, the hard drive would spin far enough over until finally it could find the file it needed to boot.

Needless to say, that wasn't it.

I had a call from our Science Librarian that her floppy drive wouldn't accept any disks. Our librarians misassume that they are all power users, and she had taken it upon herself to disassemble the drive (it was an external drive to a laptop) and couldn't visually find a problem, so she asked that I order a new one. Well, policy is to inspect a part ourselves before ordering a new one, so I went to her office to check the drive. When I got there she demonstrated that one could not insert a floppy into the drive. But I noticed that instead of the eject button being below and to the right of the slot, it was above it and to the left. I turned the drive over, inserted a disk, and, amazingly, considering that she had taken the thing apart, it worked fine.

I work for a company that does technical support for a floppy drive manufacturer. I got a call from a customer who was absolutely hysterical saying that she was going to report us to the Attorney General because we were selling a product that was worthless. After finally getting her calmed down enough to talk fairly rationally, the conversation went something like this:

At that point I put the customer on mute for a few moments while I composed myself, summoned some patience and self-control, and explained to her how to solve that problem. Did she apologize? Of course not! She flew into another tirade that we didn't include sufficient documentation with our product and wanted to know what we were going to do to reimburse her for her time and inconvenience.

A young lady came and asked why she could not open a file that she had saved to the network. I went with her to the PC she was using and opened the file in question without difficulty.

The customer called to order a new hard disk drive for his computer. He wanted a 20 meg hard drive (this was some time ago) for his IBM PS/2. He received the drive but called back, complaining that it was the wrong thing. He said he didn't need a hard drive but rather a 3 1/2" floppy drive. And if we couldn't get him a 3 1/2" floppy drive that would store 20 megs, he didn't want it and would go elsewhere.

A "cannot access drive A:" error turned out to be due to a user putting the 5 1/4" diskette in the tiny gap between drives A: and B: and then closing the drive A: door.

A tech advised a customer to put his troubled floppy back in the drive and close the door. The customer put his phone down and was heard walking across the room and shutting the door to the room.

In the process of doing a backup on a Mac, I was once given this peculiar instruction:

I had a call from a customer who said that his floppy drive recently stopped reading disks. I suggested that he clean out the dust from the drive.

Finally, I found out that he had been using spray glue near the machine.

A customer came into our store one day wanting to buy a tape-backup drive. Normally this wouldn't have been a problem, but that day the only drives we had in stock required a 1 meg per second floppy controller.

I sold him the drive. He returned it the next day. His floppy controller wasn't fast enough.

We used to supply Xenix systems. For some obscure reason Xenix's fsck command required the name of a scratch file during startup on every boot. One customer typed in /dev/hdroot0 -- the root disk block device -- as the scratch file and consequently wiped the whole hard disk. He typed this, he explained, because it was displayed on the screen just before the scratch file question.

I talked to a guy whose wife taught computer classes. At the start of her class, she had her students bring in a floppy disk and format it. This was roughly 1986 or 1987, so it was a good place to start. But at the beginning of the first class period, she was greeted by a technician who informed her that all the computers had been upgraded with hard drives. She thought that was great.

So when class started, she told her students that they would use hard drives rather than their floppies. First step: format C:.

After telling me this story, the teacher's husband laid all the blame on the tech who installed the hard drives.

My jaw dropped at this point. This guy had actually taken the time to physically add up all the space taken up by his files and directories in File Mangler. Turns out, he didn't add the sub-directories into the equation. Oops.

A customer called complaining that his new computer had a hard drive problem. When asked to describe this, he told me he ran out of space on his C: drive.

I spent fifteen minutes trying to explain that the drive was segmented into three partitions -- C:, D:, and E:, and all he had to do was use the available installer on his desktop to change the installation path.

He responded that that couldn't be right, because he had friends with computers, and none of them ever had to do that. He refused the read the manual, do what I suggested, or call anyone else for support.

After muting the customer for a few seconds to regain his composure, I calmly suggested that the man hang up and call 911. The funniest part is that this guy actually waited on hold for over ten minutes before he was able to reach a tech.

A customer brought in a Macintosh SE with a diskette stuck in the disk drive. Even using a paper clip in the manual eject hole would not eject the disk. Upon disassembling the disk drive, I discovered why. The customer had a fondness for carrying 3.5" disks in his front shirt pocket. He had also put his Visa Gold Card in his front pocket that day. It managed to lodge itself on the back of the disk by slipping under the metal shutter. Without knowing, he had inserted the disk, Visa and all, into the drive. The customer charged the repair fee.

I have a user who travels with his zip drive. He is constantly forgetting to plug one end of the cable into the computer, and the other end into the zip drive. He instead, plugs both ends into the zip drive, forming a loop, which is in no way hooked to the computer.

I had a user who had pulled a 3 1/2" floppy out of a disk drive with pliers because she "didn't know what that little button was for." She had left all the metal parts inside the drive and then had the gall to ask if the data was ok and get irate when we told her no.

A friend had a brilliant idea for saving disk space. He thought if he put all his Microsoft Word documents into a tiny font they'd take up less room. When he told me, I was with another friend. He thought it was a good idea too.

A customer called complaining that his "hard drive won't boot." After determining there was a floppy disk in the A: drive, I suggested that the customer remove it. Later, when I arrived, I found he had successfully removed the entire floppy drive from the machine.

A woman dialed tech support for a large computer manufacturer. She complained that her computer was "eating" her disks.

After a long frustrating call, the customer service representative sent a tech over to the woman's home. He was dumbfounded by what he saw.

One of the front face plates on the case was missing. Inside the computer, at the bottom of the case, were exactly twenty floppy disks in a pile.

Back when the PS/2 first came out I was setting up a bunch of machines for a Big Eight accounting firm here in Chicago. Management at the company did not want their users having floppy drives because that was just another hole for a virus to enter their network. The funny thing about those old PS/2's is that the front of the CPU had the disk slot and eject mechanism even if there was no drive in the bay (later fixed, of course). Thus, we send email out to everyone describing this anomaly and put tape over the disk slot. Needless to say, after a mere month, nearly every CPU had diskettes lying on the motherboard.

A customer said the floppy drive on her Mac wasn't working. The case had a nice rectangular 3 1/2" hole in the front, but there was no sign of the diskette. I popped open the cover, and there was the diskette sitting on the motherboard. Only then did I notice two or three pieces of plastic sitting next to the monitor. A question or two solved the mystery. The computer had been purchased without a floppy drive, so a cosmetic plastic snap-in strip had been placed over the empty floppy hole. She had pried the strip out with a nail file and shoved the floppy in. I put the case down as a "customer attempted upgrade."

A girl from my class (a blonde) once called me and complained that her computer would not boot up anymore. I asked her what she had done. She calmly replied, "Oh, I simply opened the hard disk properties tab and pressed the 'compress' button to increase the capacity. But it was taking too much time, and I got bored, so I shut it off."

  1. Index
  2. Literature
  3. Tech Support Humour
  4. Disk Drives